[State]
; Ignore the fact that there is far to much junk on my drive
IKNOWBEST=YES
;
; defines the install location
;
TargetDir=C:\Cadence\SPB_16.6-silent
;
; Reboots if required at conclusion of installation
;
RebootIfReqd=N
;
;File Server Location
;
;FileServerLocationDir=G:\SPB_16.6
;
; identifies desired maintenance behavior
; possible values are: REMOVEALL, MODIFY, REPAIR
;
OnMaintenance=REMOVEALL
;
; If REMOVEALL is selected for maintenance, this flag
; determines if rollback (if applicable) should
; be performed
;
;Rollback=N
;Do you want to backup the files updated in ISR install
;Y indicates yes
;IsrBackup=Y
;Allusers identifies the alluesr vs Cuurent user installation
; A value of NO means current user and YES meas for All Users
ALLUSERS=YES
;First time installation MODE
;You can CHOOSE COMPLETE too
MODE=COMPLETE
;Crystal reports should be updated
;Y- yes
;N - skipped
UPDATE_CRSTAL=Y
;.NET Framework should be updated
;Y- yes
;N - skipped
UPDATE_NET_FRAMWRK =Y
;VC Redistribution package should be updated
;Y- yes
;N - skipped
UPDATE_VC_REDIST=Y
;Fire wall entries to be done
;Y- yes
;N - skipped
UPDATE_FIREWALL=Y
;Should setup overwrite the existing Installation
;Y- yes
;N - no
ALWAYS_OVERWRITE=Y
;This option determines whether a disk space check is required
; Possible values are YES and NO. Yes means dont check NO means check
IKNOWBEST=YES
;Should Setup Overwrite the HOME Environment variable
;Y - yes
;N - no
OVERWRITE_HOME=Y
[Features]
;
; Identifies feature list that should be manipulated.
; If the features is not listed here it is NOT
; selected for installation.
;
Feature0=ALL OrCAD 166 Products
;Feature1=ALL OrCAD 166 Products\OrCAD_Capture_CIS
;Feature2=ALL OrCAD 166 Products\OrCAD_EE_Designer
;Feature3=ALL OrCAD 166 Products\OrCAD_FPGA_System_Planner
;Feature4=ALL OrCAD 166 Products\OrCAD_PCB_Designer
;Feature5=ALL OrCAD 166 Products\OrCAD_PCB_SI
;Feature6=ALL OrCAD 166 Products\PSpice
Feature7=ALL SPB 166 Products
;Feature8=ALL SPB 166 Products\Allegro_AMS_Simulator
;Feature9=ALL SPB 166 Products\Allegro_Design_Authoring
;Feature10=ALL SPB 166 Products\Allegro_Design_Authoring_CIS
;Feature11=ALL SPB 166 Products\Allegro_Design_Authoring_Multi_Style
;Feature12=ALL SPB 166 Products\Allegro_Editor_Router
;Feature13=ALL SPB 166 Products\Allegro_FPGA_System_Planner
;Feature14=ALL SPB 166 Products\Allegro_PCB_Librarian
;Feature15=ALL SPB 166 Products\Allegro_PCB_Router
;Feature16=ALL SPB 166 Products\Allegro_PCB_SI
;Feature17=ALL SPB 166 Products\Allegro_Package_Designer_Cadence_SiP
;Feature18=ALL SPB 166 Products\Allegro_Physical_Viewer
Feature19=ALL Documentation
[Data]
;
; The data section stores any other properties required by
; the installation. This list varies based on product.
;
;
;The working Directory
;
WorkingDir=C:\SPB_Data-Silent
;
;
;For setting FOOTPRINT Path
;
;FootprintPath=D:\Cadence\SPB_16.6-silent\share\pcb\pcb_lib\symbols
;
;SETTING LICENSE FILE
;
;Specifying the port and host information for the license server(s) sets the CDS_LIC_FILE environment variable used by Cadence applications to access the license server(s).
;
;You can get this information from the Cadence license file as follows:
;
; SERVER host1 83065c2 5280
;
;Where, host name = host1 port = 5280
;
;
;If you have multiple license servers and you want to access all of them, you can specify the port and host information for each of the license server
;delimited by a semi-colon as follows: port1@host1;port1@host2;port1@host3 For example: 5280@sunny;5280@blue;5280@sky
;
;If your license server has a fault-tolerant server configuration, you can specify the port and host information for each server separated by a
;comma as follows: port@host1,port@host2,port@host3 For example: 5280@sunny,5280@blue,5280@sky
;
;
;You can get the host and port information for a fault-tolerant server from the Cadence license file as follows,
;
; SERVER host1 83065c2 5280
;
; SERVER host2 83055b2 5280
;
; SERVER host3 82045c4 5280
;
;If you uncomment the following line, your CDS_LIC_FILE will be set to 5280@flexserver
;overwrite-lic-path=5280@flexserver
;
;If you uncomment the following line 5280@flexserver1 will be appended to current value of CDS_LIC_FILE variable.
;append-lic-path=5280@flexserver1