Using a Canon MultiPass F50 on Windows Vista
The bad news is Canon no longer supports the Canon MultiPass F50 (and I assume it's brethren in the MultiPass product line) and has no intentions of making MultiPass drivers for any version of Windows Vista or for the 64-bit version of Windows XP.
The good news is you can still make the printing feature of this multifunction device work with newer versions of Windows by using a simple work-around.
Step 1: Put the MultiPass F50 into "Printer Mode"
The MultiPass has a hidden feature which allows it to run in a printer-only mode which emulates the same feature-set as a Canon InkJet S630 printer. Don't give me credit for the discovery: I picked this up from a user named GregD on Internet.com's WinDriver's forum.
To put your MultiPass in Printer Mode, push the following buttons in the order they are listed: Menu / Scan / Copy / Set / Set. The LED display should now say "Printer Mode". If you later want to scan or fax, I simply reboot the printer (if there is a better way, hopefully someone leave a comment about it). Be sure to do this before you connect the printer to your computer, or Vista will try and fail to install it as a MultiPass.
Step 2 : Connect the printer to your PC
As I mentioned, Canon doesn't have a MultiPass driver for Vista or for Windows XP 64-bit Edition. But by using the above key combination your printer will emulate a Canon InkJet S630. If you connect the printer via USB Vista should automatically detect it as an InkJet S630. If your MultiPass is connected via parallel, you may have to manually add the printer. Be sure to select the Canon InkJet S630 driver when you do!
Enjoy this article?
Categories
- Beginner
- Complaint Dept.
- Courses
- Crash Course: Home PC Maintenance
- Developement
- Expert
- Hardware
- Intermediate
- Internet
- LAN Administration
- Linux
- Networking
- NOAH
- OS Deployment
- PHP
- PostgreSQL
- Product Reviews
- reviews
- Scripting
- Security
- Site News
- Software
- Software Updates
- Support
- The Basics
- Videos
- Web Browsing
- Web Design
- WordPress
August 19th, 2009 - 12:12
Thanx for the tip!! I’m going to try this out & hope it works!!
January 6th, 2010 - 12:24
Could not get this to work with W7 x64. According to Canon website S630 is not supported under W7.
January 6th, 2010 - 12:41
I’d offer to try it out on my Windows 7 laptop, but I FINALLY tossed my Multipass. However if you can get your hands on the driver from Vista x64 for the S630, I don’t see any reason why that wouldn’t work on Windows 7. Print drivers are completely compatible as far as I know. I don’t exactly know how to tell you to go about extracting that driver from Windows Vista though. With some trial-and-error, from a Vista computer where you have your Multipass working, you may be able to use the Printer Management MMC snap-in to locate the driver and copy it out to your Windows 7 machine. Good luck!
March 15th, 2010 - 00:23
Is the Canon Multi-pass F50 compatible with a Mac ibook g4?
March 26th, 2010 - 07:49
I can’t tell you for sure, but I kind of doubt it. Canon stopped making drivers for this printer a long time ago.